cuiheat.com
126345-01D
16
MODEL EWLCT18R
It is very important to install these logs exactly as instructed. Do not
modify logs. Only use logs supplied with heater.
1. Place bottom rear log onto base. Holes in bottom of log must seat
over pins on base as shown in Figures 31 and 31A.
INSTALLATION
Continued
Pins for Bottom
Rear Log
Bottom Rear
Log
Pin for Bottom
Middle Log
Burner Base
Figure 31 - 18" Burner base
Figure 31A - Placing 18" Bottom Rear Log
Figure 32 - Placing 18" Bottom Middle Log
Bottom Middle Log
2. Place bottom middle log onto base. Holes in bottom of log must
seat over pins on base see Figures 31A and 32.
Figure 33 - Placing 18" Bottom Front Log
Figure 34 - Placing 18" Top Right Log
Figure 35 - Placing 18" Left Top Log
(Final Assembly for 18" Model)
Grate
Fingers
Pin for Top Left Log
Pin for Top
Right
Pin for Top Left Log
Pin for Top Left Log
Bottom
Front
Log
Top Right Log
Left Top Log
3. Place bottom front log onto grate as shown in Figure 33. Front
log has cut outs for the fingers of the grate to fit into.
4. Place top right log as shown in Figure 34. This log will fit on the
pin on bottom middle log resting on the flat recesses on the rear
and front logs.
5. Place top left log as shown in Figure 35. This log will fit on the
matching pins on the rear and front logs (see Figure 34 for pin
locations).
NOTE:
this is the final assembly for the 18'' model
.
