EVERVIEW AR300 series User Manual Download

Page: 70 / 179

User Manual of Digital Video Recorder

Figure 6.2 Right-click Menu under Live View

Press

PLAY

button on the IR remote control to play back record files of the channel under single-screen

live view.

Under multi-screen live view, record files of the selected channel will be played back.

Note:

Pressing numerical buttons will switch playback to the corresponding channels during playback

process.

Playback management.

The toolbar in the bottom part of Playback interface can be used to control playing progress, as shown in

Figure 6.3.

Figure 6.3 All-day Playback Interface

The channel and time selection menu displays by moving the mouse to the right of the playback interface.

Click the channel(s) if you want to switch playback to another channel or execute simultaneous playback of

multiple channels, as shown in Figure 6.4.

Summary of Contents for AR300 series




















































































































































































Search results

Summary of Contents for AR300 series

Reviews:

Related manuals for AR300 series

Brands by name

Popular brands

EVERVIEW AR300 series, User Manual

Search results

Summary of Contents for AR300 series

Reviews:

Related manuals for AR300 series

Brands by name

Popular brands