EVERVIEW AR300 series User Manual Download

Page: 52 / 179

User Manual of Digital Video Recorder

Figure 5.7 Edit Schedule

To arrange other schedule, leave the

All Day

checkbox blank and set the Start/End time and Type.

Note:

Up to 8 periods can be configured for each day. And the time periods can’t be overlapped each other.

Repeat the above steps2)-5) to schedule recording for other days in the week. If the schedule can also be set to

other days, click

Copy

Figure 5.8 Copy Schedule to Other Days

Note:

The

Holiday

option is available in the Schedule dropdown list when you have enabled holiday schedule

Holiday Settings

. Refer to C

hapter 5.6 Configuring Holiday Record.

Figure 5. 9 Holiday Settings

Click

to save setting and back to upper level menu.

Summary of Contents for AR300 series




















































































































































































Search results

Summary of Contents for AR300 series

Reviews:

Related manuals for AR300 series

Brands by name

Popular brands

EVERVIEW AR300 series, User Manual

Search results

Summary of Contents for AR300 series

Reviews:

Related manuals for AR300 series

Brands by name

Popular brands