EVERVIEW AR300 series User Manual Download

Page: 23 / 179

User Manual of Digital Video Recorder

The Setup Wizard can walk you through some important settings of the device. By default, the Setup Wizard

starts once the device has loaded.

Operating the Setup Wizard:

Select the system resolution from the drop-down menu. The default resolution is 1280×1024/60Hz.

Click

Apply

to save the resolution settings.

Figure 2.1 Start Wizard Interface

Note:

By default, the system resolution is set to 1280×1024.

Check the checkbox to enable Setup Wizard when device starts. Click

Next

to continue the setup

wizard.

You can also click

Cancel

to exit the Setup Wizard, or use the Setup Wizard next time by leaving the

“Start wizard when DVR starts?” checkbox checked and exit.

Figure 2.2 Start Wizard Interface

Click

Next

button on the Wizard window to enter the

Login

window, as shown in Figure 2.3.

Enter the admin password. By default, the password is 12345.

To change the admin password, check the

New Admin Password

checkbox. Enter the new

password and confirm the password in the given fields.

Summary of Contents for AR300 series




















































































































































































Search results

Summary of Contents for AR300 series

Reviews:

Related manuals for AR300 series

Brands by name

Popular brands

EVERVIEW AR300 series, User Manual

Search results

Summary of Contents for AR300 series

Reviews:

Related manuals for AR300 series

Brands by name

Popular brands