MIO–CCE–4K/3G
SMPTE ST 2110/4K/3G/HD/SD Closed Caption Encoder with Media–to–IP Streaming
Revision 1.0
Page - 13
4.5.2. Output Video Controls
Loss of Video Mode:
Set the behavior of the video stream upon input loss. Options are black screen, blue
screen and freeze image.
Figure 4-9: Loss of Video Mode
Force Freeze Frame:
Enable or disable the capacity to force freeze frame.
Figure 4-10 : Force Freeze Frame
Crosspoint Output:
Set the output type when crosspoint input video is selected. Options are Program
(PGM) & Monitor (MON).
Figure 4-11: Crosspoint Output
4.5.3. Video Status
This section displays the input video source, video payload ID, and detected input video standard for the
current video signal.
4.5.4. Video Faults
Video Trap Status:
This display will turn red if a genlock fault is detected, remains green if no genlock fault
is found.
Video Trap Enable:
This slider control allows the user to enable sending a fault notice to the trap servers
enabled in Section 4.3.3. Slide the control to the right to enable trap, slide to left to disable.
