MIO–CCE–4K/3G
SMPTE ST 2110/4K/3G/HD/SD Closed Caption Encoder with Media–to–IP Streaming
Page - 28
Revision 1.0
Monitor:
This field displays the connection status of the selected TCP.
CEA 608 Permission:
This control enables or disables control CC permission for the selected serial port.
Allows CEA 608 control permission for CC1-CC4, TXT1-TXT4 & XDS
CEA 708 Permission:
This control enables or disables control service permission for the selected serial
port. Allows control service control for services 01-16.
4.13.3. TCP Control
Figure 4-36: WebEASY
®
- Communication Ports – TCP Control
IP Address:
Set IP address for TCP port.
Netmask:
Set netmask address for TCP port.
Gateway:
Set gateway address for TCP port.
Login Enable:
This control is used to enable telnet login (default value is disable)
Login:
Telnet login username. Only valid if login enabled
Password:
Telnet login password. Only valid if login is enabled.
Timeout:
Controls duration (minutes) of inactivity before telnet session is terminated (1 min to 31 minutes)
TCP Port:
Assigns a TCP Port value to MIO-CCE device ports F, G & H. (Ports 23, 24 & 26 available)
Figure 4-37: TCP Port
Port (F-H) Status:
Displays the status of TCP ports F-H.
