MIO–CCE–4K/3G
SMPTE ST 2110/4K/3G/HD/SD Closed Caption Encoder with Media–to–IP Streaming
Page - 56
Revision 1.0
5.3.6.
Report Firmware Version
The caption encoder will respond with a message identifying its firmware version and port name.
Command:
^A?<cr>
Returns
Evertz MIOCCE-3G Ver:CK88D5 U000427 -- Use ^AH{return} for help
Port B (Example)
5.3.7.
Command Help
This command returns a help message from the caption encoder.
Command:
^AH<cr>
Default:
none
Returns:
Cmds supported - ^C,^F,...
^A +0,1,2,3,4,5,6,7,8,9,A,B,c,E,H,I,M,O,P,Q,r,t,u,S,Y,?
5.3.8.
Report Bypass Switch Mode
This command returns a message that shows the status of the video bypass relay and the caption keyer.
Command:
^AS<cr>
Example results:
REMOTE OVERRIDE
indicates that the keyer is disabled but video will be passed through the MIO–CCE–
4K/3G
EXTERNAL BYPASS
indicates the SDI bypass relay has been activated by an external signal.
LOCAL BYPASS ON
indicates the SDI bypass relay has been activated by the MIO–CCE–4K/3G menu
selection.
5.3.9.
Report Battery Status
This command will return the status of the internal battery
Command:
^AY<cr>
Example results:
Battery OK
5.3.10. Set / Report Time of Day Clock
This command will return the current time of day or will allow the internal clock to be set. The unit will
maintain the correct time even through power outages.
Command:
^Ac<cr>
Example results:
Local time is 13:47:39, Time zone is 05:00, DST is ON, DSO is ON
Command:
^Ac<sp>U<cr>
