evertz 9780MUX-IPGE-ASI User Manual Download Page 38

Page: 38 / 64

9780MUX-IPGE-ASI

Compact ASI/IP Re/De-Multiplexer

Page - 28

Revision 1.0

4.4.1.2. Offline Output\Advanced Tab

Figure

4-25 : VistaLINK

PRO - Offline Output - Advanced Tab

PCR Offset (msec):

This control allows the user to set the PCR offset in milliseconds.

Null Bitrate (kbps):

This field allows the user to set the Null Bitrate in kbps.

PSIP Table Source:

This dropdown menu allows the user to set the PSIP table source. Possible

options are Guidebuilder1, 2 and None.

Guidebuilder 1 IP Address:

This control allows the user to set the IP address for GuideBuilder 1.

GuideBuilder 1 Port:

This control allows the user to set the port number for GuideBuilder 1.

STT Restamp:

This dropdown menu allows the user to turn On or Off the STT Restamp which is used

for ATSC PSIP table insertion application.

EBP:

This dropdown menu allows the user to enable or disable the EBP.

Genlock:

This dropdown menu allows the user to enable or disable the Genlock.

Standalone LTC:

This dropdown menu allows the user to enable or disable the Standalone LTC.

LTC:

This dropdown menu allows the user to enable or disable the LTC.

LTC Pid:

This field indicates the LTC Pid.

Summary of Contents for 9780MUX-IPGE-ASI

































































Search results

Summary of Contents for 9780MUX-IPGE-ASI

Reviews:

Related manuals for 9780MUX-IPGE-ASI

Brands by name

Popular brands

evertz 9780MUX-IPGE-ASI, User Manual

Search results

Summary of Contents for 9780MUX-IPGE-ASI

Reviews:

Related manuals for 9780MUX-IPGE-ASI

Brands by name

Popular brands