evertz 7814UDX-4K Series User Manual Download | Manualshive

Page: 16 / 64

background image

7814UDX-4K Series

HD/3G/UHD Up/Down/Cross Converters

Page - 6

Revision 1.2

2.1.

INPUT/OUTPUT CONNECTIONS

PGM IN A/B/C/D:

Accepts a 10-bit serial digital video signal. All inputs are compatible with SMPTE
292M,  SMPTE 372M and SMPTE 425M  standards. The module can be set to
receive  a specific video standard or set to automatically detect the supplied input
video standard.

Note:

Non-4K inputs must be plugged in to PGM IN A.

PGM OUTPUT A1/A2/B1/B2/C1/C2/D1/D2:

These DIN connectors are used to output video as serial component video. All outputs are compatible with
SMPTE 292M, SMPTE 259M or SMPTE 372M standard.

REF IN:

This DIN is for connecting a bi-level or tri-level reference. The Reference format is auto-
detected by the module. Output video can be timed with respect to the supplied
reference using the

H Phase Offset

and

V Phase Offset

module controls. When no

reference is provided, the output video is timed with respect to the input video.
Reference may also be supplied via the 7700FR-QT, 7801FR and 7800FR FRAME
REFERENCE inputs. User Control is used to select either the card’s external reference
or the FRAME REFERENCE inputs.

The 7814UDX-4K series conversion modules accept standard reference signals including bi-phase (525i59

or 625i50) and tri-level sync signals (1080i59 or 1080i50).

«
...
14
15
16
17
18
...
»

Summary of Contents for 7814UDX-4K Series

































































Reviews:

No comments

Related manuals for 7814UDX-4K Series

Brand: Panasonic Pages: 38

Brand: Omega Digitech Pages: 8

LaCinema Mini HD Connect

Brand: LaCie Pages: 4

Brand: TANDBERG Pages: 384

E5714 DSNG Voyager

Brand: TANDBERG Pages: 314

CSI-75K-T40001-E

Brand: CanadianSolar Pages: 45

DuoPak APD 2067

Brand: Absolute Process Instruments Pages: 2

Brand: K&S BASIC Pages: 17

Brand: StarTech.com Pages: 24

Brand: Vacon Pages: 32

Brand: Benchmark Pages: 51

WinFast Wi2000D

Brand: Leadtek Pages: 2

Brand: Sarowin Pages: 6

Brand: Prism Sound Pages: 63

Brand: Allen-Bradley Pages: 42

Brand: Sincro Pages: 84

Brand: ViewSonic Pages: 2

Brand: Datavideo Pages: 23

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands