evertz 7814UDX-4K Series User Manual Download

Page: 39 / 64

7814UDX-4K Series

HD/3G/UHD Up/Down/Cross Converters

Revision 1.2

Page - 29

Transport Stream Standard:

This field indicates the transport stream standard that is detected through

12G input.

5.4.3. Additional Video Delay

12G to Quad-Link 3G Conversion:

This field displays the additional video delay for the 12G to 3G

translation. This delay is on top of the processing delay found in the Video Tab.

Quad-Link 3G to 12G Conversion:

This field displays the additional video delay for the 3G to 12G

translation. This delay is on top of the processing delay found in the Video Tab.

5.4.4. Additional Audio Delay

12G to Quad-Link 3G Conversion:

This field displays the additional audio delay for the 12G to 3G

translation. This delay is on top of the processing delay found in the Audio Tab.

Quad-Link 3G to 12G Conversion:

This field displays the additional audio delay for the 3G to 12G

translation. This delay is on top of the processing delay found in the Audio Tab.

5.4.5. Audio Input Presence on Selected 12G Input

Audio Group 1-4:

This field indicates the audio group presence for audio group 1-4.

5.5.

NOISE REDUCTION

The

Noise Reduction

panel is used to configure parameters associated with the video noise reduction

processing.

Figure

5-9 : WebEASY

- Noise Reduction Panel

Temporal Noise Reduction:

The Temporal Noise Reducer (

TNR) Level

controls the strength of the

applied

Temporal Noise Reduction

filter. Select the level of noise reduction to be applied by selecting the

appropriate value from the drop down menu as shown below.

Summary of Contents for 7814UDX-4K Series

































































Search results

Summary of Contents for 7814UDX-4K Series

Reviews:

Related manuals for 7814UDX-4K Series

Brands by name

Popular brands

evertz 7814UDX-4K Series, User Manual

Search results

Summary of Contents for 7814UDX-4K Series

Reviews:

Related manuals for 7814UDX-4K Series

Brands by name

Popular brands