evertz 7814UDX-4K Series User Manual Download | Manualshive

Page: 54 / 64

background image

7814UDX-4K Series

HD/3G/UHD Up/Down/Cross Converters

Page - 44

Revision 1.2

Pass Through

When set to

Pass Through

the module will take ANC packet from frame 1 and

insert onto field 1 and data on frame 2 will be inserted onto field 2.

Duplicate Packet

When set to

Duplicate Packet,

the module will embed

data from frame 1 on to

both field one and two on the output.

Field 1 Only

When set to

Field 1

Only

, the module will only embed the incoming packets

onto Field 1 on the output.

Field 2 Only

When set to

Field 2 Only

, the module will only embed the incoming packets

onto Field 1 on the output.

ANC Packet Pass Thru Status:

This monitoring window returns the current state of the ANC Packet Pass

Thru module. This will display if the control is disabled or passing the incoming ANC data. If there is no
ANC data present on the input, this control will indicate Not Detected.

5.12.2. Direct ANC Pass Thru Control

The Direct ANC Pass Thru mode of operation  routes all ancillary data in both HANC and VANC frame
accurately from input to output. This mode of operation is designed for the use case when the input video
standard and output video standard are identical. Additionally,  Direct ANC Pass Thru will also support
passing SD-VBI waveforms from input to output.
All packets that are processed by the  module itself (For example: Source ID) are safely blocked from
passing from input to output while operating in Direct ANC Pass Thru.

Key Functional Notes of Direct ANC Pass Thru:

•

Only supported when Input Video Standard is identical to the Output Video Standard.

•

Direct ANC Pass Thru overrides Mapped ANC Pass Thru when it is enabled and Input Video

Standard is identical to the Output Video Standard.

•

When Direct ANC Pass Thru is disabled or invalid, Mapped ANC Pass Thru rules are applied.

•

Supports SD-VBI wave pass through for SD video.

•

ANC packets processed by the system (For example: Source ID) will be blocked from passing

through to avoid duplicate entries on the output video.

Direct ANC pass Thru:

This control allows the user to enable or disable Direct ANC Pass Thru for ANC

data that is not processed through the module to pass through without getting striped on the output video
signal.



NOTE:

Direct ANC PassThru is only functional when input and output video standards

are identical.

«
...
52
53
54
55
56
...
»

Summary of Contents for 7814UDX-4K Series

































































Reviews:

No comments

Related manuals for 7814UDX-4K Series

Brand: Xantrex Pages: 76

Brand: Olimpia splendid Pages: 47

Brand: PowerConnections Pages: 10

Brand: All-Power Pages: 35

Brand: N-Tron Pages: 2

Brand: Mystery Pages: 36

Brand: Black Box Pages: 16

Brand: Extron electronics Pages: 8

SINUS CABINET K Series

Brand: Elettronica Santerno Pages: 226

Brand: CYP Pages: 38

Brand: Vicon Pages: 18

enginko MCF-LW06485

Brand: M2M Pages: 14

AS-07UR4SYDDB15

Brand: Hisense Pages: 59

Brand: PBI Pages: 31

Brand: Sarowin Pages: 6

Atlona OmniStream 122

Brand: Panduit Pages: 12

Brand: Jaguar King Pages: 54

SinePower MSI212

Brand: Waeco Pages: 220

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands