7800/7700 MultiFrame Manual
7812UDXD Series 3G/HD Up/Down/Cross Converter with Simultaneous Dual Format Outputs and AES I/O
Page - 22
Revision 1.1.1
Scaler
Configuration for setting the scaler aspect ratio conversion (ARC) mode, the default
AFD stamping mode and the default side panel colours. In addition, scaler filter
bandwidths and H/V edge processing controls are defined in this control tab.
Note that when automatic steering of ARC modes based on AFD is enabled
(within the AFD control tab); the ARC conversion controls within the SCALER
control tab are disabled. Refer to the AFD Control and AFD ARC control tabs
for more information.
Note that when the AFD Stamp Source is set to ‘Use Scaler’ in the AFD Control
tab, the AFD Stamp control within the Scaler control tab is disabled. Refer to
the AFD Control and AFD ARC control tabs for more information.
CC Control
Configuration for the closed captioning translation process including service level
mapping and HD write lines.
Upstream CC
Control
(+CC option)
The
Upstream CC
menu is used to set up and configure upstream SDI captions.
Upstream CC controls include the ability to block or pass data from PVR Data
control, CEA-608 services including CC 1 -4, Text 1 – 4 and XDS packets and CEA-
708 Service control Packets including Service 1 – 16.
CDP Setup
(+CC option)
The
CDP Setup
menu, enables the user to configure the encoding of Caption
Distribution Packets (CDPs) in the VANC area of HD/3G video.
Telnet Control
(+CC option)
The
Telnet Ports
menu allows the user to configure the input/output settings of
Telnet.
Utilities Control
Configuration for managing card presets including storing configurations to specific
user presets, recalling specific user presets and enabling/disabling Auto Recall
Presets functionality.
Change Product
Some options can be purchased from sales and added to the 7812 without hardware
upgrades.
VANC Bypass
Configuration used to bypass VANC data.
SD Aperture
Control
Configuration for setting the SD Aperture to be used when performing scaling and
ARC operations including independent settings for both Clean and Production
Apertures.
AFD Control
Configuration for setting how the card will process and respond to AFD.
Note that when automatic steering of ARC modes based on AFD is enabled,
the ARC conversion controls within the SCALER control tab are disabled.
Note that when the AFD Stamp Source is set to ‘Use Scaler’, the AFD Stamp
control within the Scaler control tab is disabled.
AFD Monitor
SMPTE2016-1 Monitor -
Monitoring tab used to display the incoming/outgoing
Active Format Description (AFD).
AFD ARC
Configuration for defining what aspect ratio conversions will be performed in
response to incoming AFD values. Each incoming AFD code can select from the
predefined list of ARC modes or a user defined ARC mode. These responses are
defined within this control tab.
Noise Control
Configuration for setting noise reduction. Individual configuration for Mosquito Noise
Reduction, Block Artifact Reduction and Motion Adaptive Spatial-Temporal Noise
Reduction.
