7800/7700 MultiFrame Manual
7812UDXD Series 3G/HD Up/Down/Cross Converter with Simultaneous Dual Format Outputs and AES I/O
Revision 1.1.1
Page - 5
2.1.
PRODUCT OPTIONS
This manual covers all variations and ordering options for the 7812UDXD series platform. The majority of
card controls are common across all products variations and ordering options. A small number of items
change depending on the product variation and ordering option. The following chart provides a list of
available product variations/ordering options and outlines what module control changes based on each.
Product
Options
Description
-AES8
• VIDEO CONTROL
Tab
"DMX Loss of Video Mode" control is available only with –AES8 versions
• AUDIO INPUT
Control Tab
AUDIO INPUT control tab is available only with –AES8 versions
•
AUDIO PROC CH1-CH4/CH 5-CH8/CH9-CH12/CH13-16
control tabs
All selectable options under “Source X” and “Source Y” controls within AUDIO PROC
CH1-CH4 control tab are labeled slightly differently than non-AES versions. In –AES8
versions, selectable options are labeled as
Channel 1…N
rather than
DMX Channel
1…N
. This is done to reflect that –AES8 versions of 7812UDXD modules include an up-
front audio selector that chooses whether to process de-embedded audio or AES audio
for a particular channel pair.
•
AUDIO 5.1 DOWN MIX
Control Tab
All selectable options in the “L Source", "R Source", "C Source", "LFE Source", "Ls
Source", "Rs Source" controls within the AUDIO 5.1 DOWN MIX control tab are labeled
slightly differently than non AES versions. In the –AES8 versions, selectable options are
labeled as
Channel 1….N
rather than
DMX Channel 1….N
. This does not to reflect that
the –AES8 versions of the modules include an up-front audio selector that chooses
whether to process de-embedded audio or AES audio for a particular channel pair.
•
AUDIO/VIDEO TRAPS
Control Tab
Traps for "AES 1" through "AES 8" audio inputs
-3G
•
VIDEO CONTROL
Tab
The "3G Dual Link Channel Swap"
-F
•
VIDEO CONTROL
Tab
Under the “
Video Input Source”
control, the option to select the Main PGM source and
Backup PGM source.
+F
• VIDEO CONTROL
Tab
Under the
“Video Input Source”
control, the option to select Main PGM in BNC + fill
