evertz 7708SFP Series, User Manual

Page: 22 / 46

7708SFP
Fiber Optic SFP Card Module
Page - 14
Revision 1.0
Module Type: Displays the 7708SFP series module type
Module Serial Number: Displays the part serial number, this is required to access the card via Evertz
Product Support Services Web page.
Module Version: Displays the current firmware version being used on the card.
Upgrade Support:
Displays whether or not there is Upgrade Support that is provided for the current
firmware version.
Receiver Optical Power: This control displays the currently measured optical power on the receiver
input in dB.
Receiver Detected Standard: Displays video output standard
Transmitter Wave Length:
This control displays the current wavelength in nanometres(nm) being
transmitted.
Transmitter Laser Status: This control displays the current transmitter laser status.
Transmitter Laser Enable: This control displays will confirm if the transmitter laser is either ‘Enabled’
or ‘Disabled’.
Transmitter Detected Standard : Displays Video input standard
4.2.3. Notify
Figure 4-3: Trap Enable & Fault Status
Receiver Optical Power High: Optical input power exceeds max input power specification.
Receiver Optical Power Low: Optical input power below threshold.