evertz 7708SFP Series, User Manual

Page: 40 / 46

7708SFP
Fiber Optic SFP Card Module
Page - 32
Revision 1.0
5.2. REMOTE UPGRADE PROCEDURE USING VistaLINK
®
To perform the remote upgrade for the 7708SFP you will need the following setup:
•
A working install of a VistaLINK
®
Pro client or VLPRO-C that’s version 10.0.7 or greater.
•
A downloaded and unzipped FC image file (.bin file) from http://www.evertz.com
5.2.1. Upgrading the 7708SFP Image using VistaLINK
®
1) Use the right-click mouse button on the ‘7708SFP’ in the tree and select Version Information
…’ option.
2) Open hardware tree and select card to be upgraded
3) Check mark card or cards to be upgraded.
4) Click the ‘Upgrade’ button on bottom right corner.
5) Click the ‘Browse’ button to select the unzipped 7708SFP Image .bin file downloaded in
section 5.1.1.
6) Click the ‘Upgrade’ button and wait for the upload to complete. This will take approximately 5 to
10 minutes depending on network traffic.
Upon completion, the 7708SFP series modules will reboot automatically and return online in normal
“run” mode.