evertz 7700 Series Manual Download Page 86 | Manualshive

Page: 86 / 94

background image

7700 MultiFrame Manual
7736CEM Composite Encoder with Monitoring

Page - 76

Revision 1.5

*Grey background indicates un-implemented or un-tested features

8.9.1. Text

The text displayed in the fault window may either have a background box or if too much video information
is hidden, it may be inserted with a thin black outline.

8.9.2. Background Colour

This parameter enables the user to select the desired background colour around the text in the fault
windows.

8.9.3. Text Opacity

This parameter sets the fault window text opacity or how much video picture content will be visible through
the text characters.

When set to the minimum value, very little of the white window text will be visible over the video content.
At the maximum value, very little of the background video will be visible through the white window text.

8.9.4. Background Opacity

This parameter sets the fault window background opacity or how much video picture content will be visible
through the window background.

When set to the minimum value, very little of the window background colour will be visible over the video
content. At the maximum value, very little of the background video will be visible through the window
background.

8.9.5. Setting the Horizontal Position of the Fault Windows

For brevity in the manual, only

Fault Window 1

will be discussed.

The

Horizontal

parameter sets the leftmost character position for the respective window.

When you select this parameter, the screen text will disappear and a box of the correct size will appear.
Move it around to the desired position with the sliders.

8.9.6. Setting the Vertical Position of the Fault Windows

The

Vertical

parameter

sets the top row for the respective window.

When you select this parameter, the screen text will disappear and a box of the correct size will appear.
Move it around to the desired position with the sliders.

8.9.7. Setting the Fault Window Font Size

This parameter sets the font size of the program rating window.

When it is set to

Big

the font size will be double the height and width of the

Normal

font size.

«
...
84
85
86
87
88
...
»

Summary of Contents for 7700 Series































































































Reviews:

No comments

Related manuals for 7700 Series

Brand: NAD Pages: 36

Brand: NAD Pages: 3

Brand: NAD Pages: 3

Brand: Karbon Audio Pages: 19

K2 DSP+AESOP, K3 DSP+AESOP

Brand: powersoft Pages: 92

Brand: Alpine Pages: 18

Brand: IC Audio Pages: 25

Brand: MC Crypt Pages: 2

Brand: R.V.R. Elettronica Pages: 34

Brand: Advantech Pages: 45

Tone Blaster Xtreme TBX15R

Brand: Ibanez Pages: 60

Brand: CTP Systems Pages: 6

Brand: QSC Pages: 13

Brand: Genz Benz Pages: 7

Brand: Taga Harmony Pages: 12

Brand: JBL Pages: 16

Brand: soundsation Pages: 10

Brand: Krell Industries Pages: 35

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands