7700 MultiFrame Manual
7736CEM Composite Encoder with Monitoring
Page - 42
Revision 1.5
*Grey background indicates un-implemented or un-tested features
7.9.2.1. Setting the Horizontal Position of On Screen Windows
On-screen display
configuration
The
Window H
position menu item sets the leftmost character position for
the respective window.
When you select this parameter, the screen text will disappear and a box
of the correct size will appear. Move it around to the desired position with
the toggle switch. Press the pushbutton when done.
Window position
Status window H
0 to 39
7
7.9.2.2. Setting the Vertical Position of On Screen Windows
On-screen display
configuration
The
Window V
position menu item sets the top row for the respective
window.
When you select this parameter, the screen text will disappear and a box
of the correct size will appear. Move it around to the desired position with
the toggle switch. Press the pushbutton when done.
Window position
Status window V
0 to 19
7
7.9.3. Selecting What Bar Graphs And Windows To Display
The windows and bar graphs can be turned permanently on or off. The
Window enable
menu item is
used to program the on/off states of the text and bar graph windows. To display the Fault windows use
the
Fault condition
menu item on the
Fault definitions
menu. (See section 7.11.1.4)
When you select the
Window enable
menu item you are presented with a list of the possible on/off states
as shown in Table 7-3. Select the desired function using the toggle switch. When the pushbutton is
pressed, the cell cycles through the valid values for the field. Each of the windows and bar graph displays
can be set to
On
or
Off
. When set to
On
, the corresponding window or bar graph is always displayed.
When set to
Off
, the window or bar graph is always off.
Item
State
Fault 1
Fault 2
Ch ½ level bars
Ch ¾ level bars
Ch ½ phase bars
Ch ¾ phase bars
Status
Time code
Program Rating
CC
XDS
SID
Table 7-3: Methods of Turning Windows and Bar Graphs On and Off
7.9.4. Setting the Text Window Attributes
The On screen text windows can be displayed as white characters with or without a coloured background.
In addition the text and background opacity or how much video picture content will be visible through the
text or background is adjustable. The
Text window config
menu items are used to set these parameters
for all the text windows except the Fault windows. See section 7.9.5 for information on setting the
Fault
window
attributes.
