2.3
Maintenance table
Description
Parts list # Action
Avarage
applications
(Cycles*)
Heavy
applications
(Cycles*)
Remarks
Tension wheel
116
Check/Replace
As required
Remove and check for wear or damage
Outer notcher
(2 pcs.)
169
Check/Replace or turn As required
Remove and check for wear or damage
Jaws (2 pcs.)
161
Check/Replace
As required
Remove and check for wear or damage
Jaw axle(2 pcs.)
158
Check/Replace
As required
Remove and check for wear or damage
Jaw pin (2 pcs.)
163
Check/Replace
As required
Remove and check for wear or damage
Guidance bolt
180
Check/Replace
As required
Remove and check for wear or damage
Cutter
167
Check/Replace
As required
Remove and check for wear or damage
Connecting rod cpl. 61
Check/Replace
60‘000
50‘000
Remove. Check bearing and replace connecting rod if necessary.
Base plate
1
Check/Replace
60‘000
50‘000
Check the strap cutting edge for wear.
Roller
201
Check
60‘000
50‘000
It must be possible to turn the roller with little effort.
Toothed belt
58
Replace as preventive
measure
60‘000
50‘000
Toothed belt
38
Replace as preventive
measure
60‘000
50‘000
Belt pulley cpl.
94
Replace as preventive
measure
60‘000
50‘000
A defective or dirty freewheel can damage the motor axle.
Belt pulley cpl.
98
Replace as preventive
measure
60‘000
5‘0000
A defective or dirty freewheel can damage the motor axle.
* For the read out of the cycle counter, see chap. 2.1.5.
Evers GmbH Graf-Zeppelin-Str. 10 46149 Oberhausen T49 208 99475-0 T49 208 99475-31 [email protected] eversgmbh.de
