3.1.2
Sealing and cutting procedure
Symptom
Possible cause
Rectification
The sealing is com-
pletely finished, the
green light appears,
but the strap is not cut
or not cut completely.
The notch is not deep
enough
1. The leading edge on the base plate is worn out
2. Plain bearing in connecting rod worn out
3. The cutting edge on the base plate is worn out or
or the clamping foot has a hairline crack
– Replace base plate (# 1)
– Replace connecting rod cpl. (# 61)
– Replace base plate (# 1)
The sealing unit is not
pulled up or not com-
pletely pulled up when
at rest
1. Shaft (# 188) is broken.
– Check all parts involved
– Replace shaft (# 188)
The strap can only be
inserted into the base
plate with difficulty or
not at all
1. Foreign body / strap remnants
2. Strap not according to specification.
– Clean / remove
–
Use strap according to specification.
Symptom
Possible cause
Rectification
The tool remains on
the packaged goods
after the sealing
process and cannot be
detached
1. In automatic mode, the pliers remain on the seal to
prevent the tool from falling on the packaging
– Pull the trigger
3.1.3
Remove the tool from the packaged goods
Evers GmbH Graf-Zeppelin-Str. 10 46149 Oberhausen T49 208 99475-0 T49 208 99475-31 [email protected] eversgmbh.de
