33
ENGLISH
use protective gloves when handling the wooden packaging and the wooden base.
The presence of splinters may cause damage to your hands
- remove the PVC film applied as a protection to the outer surfaces of the refrigerated cabinet
- position the refrigerated cabinet using a level with possible adjustment of the feet of the metal base (Fig. 5 )
Fig.5
- position the grille holding guide fails in the holes of the racks (Fig. 6 )
Fig.6
- insert the grilles for food in the special guides
- insert the condensate water drain pan into the special guide rails already fixed under the refrigerated
cabinet if provided.
CHAPTER 14 ELECTRICAL WIRING AND CONNECTIONS
The electrical system and connection must be carried out by qualified personnel. Before installation,
measure the impedance of the network, the impedance value for the connection to the network must
not exceed 0.075 ohm.
For safety reasons you must follow these guidelines:
- verify that the sizing of the electrical system is suitable for the power consumption of the refrigerated
cabinet and that it provides for a differential switch (circuit breaker)
- in case of incompatibility between the outlet and the plug of the refrigerated cabinet, replace the
outlet with another of a suitable type provided that it is in accordance with regulations
- do not insert adapters and/or reductions (Fig. 8)
