23
ENGLISH
The following are the measures taken to protect against other risks:
- electricity:
The refrigerated cabinet has been designed, built and equipped so as to prevent risks
from electricity, in accordance with the specific legislation in force
- noise:
The refrigerated cabinet has been designed and built in such a way that risks resulting from
the emission of airborne noise are reduced to the minimum level
8.1 safety devices adopted
It is absolutely forbidden (Fig. 2):
- to tamper with or remove the evaporator housing casing that protects the user against the risk of
being cut by the evaporator fins and the movement of the fan motor
- remove the labels applied at the inner edge of the engine compartment, showing the technical
specifications (1) and the instructions for grounding (2)
- remove the label applied on the evaporator guard and near the electrical wiring inside the engine
compartment, which warns the user to turn off the power supply before working on the unit (3)
- to remove the labels applied inside the engine compartment, indicating grounding (4)
- to remove the label applied on the power cord, indicating the type of power supply (5)
The manufacturer declines any responsibility for the safety of the refrigerated cabinet if this were to
happen.
1
2
3
3
4
5
4 2 1
Fig.2
8.2 Indications for optimal operation
- do not obstruct the motor-compartment air intakes (place at minimum 50 cm from ceiling)
- do not insert foods or liquids that are still hot
- place the foodstuffs on the appropriate shelves or containers. Do not place them directly on the
bottom, or leaning against the walls, doors or fixed guards
- close the doors carefully
- always keep the defrost water drain hole clear of obstructions
- limit, to the extent possible, the frequency and duration of door opening. Each opening causes a
change in the internal temperature
- load the goods on the shelves in a phased manner
- perform periodically current maintenance (see chapter 3)
In case of interruption or failure of the power supply circuit, prevent the opening of the doors in order
to maintain a uniform temperature inside the refrigerated cabinet.
If the problem persists longer than a few hours it is recommended to move the material to a suitable
place.
