10
ASSEMBLY INSTRUCTIONS
For queries or additional product information, please call our Service Centre on:
087 997 0865
Please have your model name on hand.
www.everlastsa.co.za
Everlast/SA everlast_sa
1
24
37
53
59
10
64
2
3
STEP 3
1. Remove 2pcs Hexagon Bolts (24) and 2pcs Flat Washer (37) from the Handlebar Post (3). Remove bolts using Allen
Wrench provided.
2. Attach Handlebar (2) onto Handlebar Post (3) using 2pcs Hexagon Bolts (24) and 2pcs Flat Washers (37)
that were removed previously. Tighten bolts using Allen Wrench provided.
3. Remove 2pcs Cross Pan Head Screws (64) from the Computer (10). Remove screws using Spanner with
Phillips Screwdriver provided.
4. Connect the Extension Sensor Wire (59) and Hand Pulse Sensor (53) with the wires that comes from the
Computer (10).Tuck wires into the hole of Handlebar Post (3), then attach the Computer (10) onto the top end of
Handlebar Post (3) with 2pcs Cross Pan Head Screws (64) that were previously removed. Tighten screws
using Spanner with Phillips Screwdriver provided.