8
ASSEMBLY INSTRUCTIONS
For queries or additional product information, please call our Service Centre on:
087 997 0865
Please have your model name on hand.
www.everlastsa.co.za
Everlast/SA everlast_sa
54
26
35
20
21
35
34
34
36
36
4
6
1
19
19
36
34
IMPORTANT - ASSEMBLE WITH ALL NUTS AND BOLTS LOOSE AT FIRST, ONLY TIGHTEN AFTER
COMPLETING ALL ASSEMBLY STEPS. UNPACK THE BOX AND PLACE ALL PARTS ON THE FLOOR.
CAREFULLY REMOVE ALL PACKING MATERIAL AND CHECK EACH PART AGAINST THE MANUAL FIRST.
REMEMBER SOME PARTS ARE PRE-ASSEMBLED TO LARGER COMPONENTS.
STEP 1
1. Attach Front Stabiliser (6) onto the front curve of the Main Frame (1) using 2pcs Bolts (35), 2pcs Arc Washers
(36) and 2pcs Cap Nuts (34). Tighten Cap Nuts using Spanner with Phillips Screwdriver provided.
2. Attach the Rear Stabiliser (4) onto the front curve of the Main Frame (1) using 2pcs Bolts (35), 2pcs Arc Washers
(36) and 2pcs Cap Nuts (34). Tighten Cap Nuts using Spanner with Phillips Screwdriver provided.
The Cranks, Pedal Shafts, and Foot Pedals are marked “R” for Right and “L” for Left. Insert pedal
shaft of Left Foot Pedal (20) into threaded hole in the Left Crank (19). Turn the pedal shaft by hand in
counter-clockwise direction until tight.
Note: DO NOT turn the pedal shaft in the clockwise direction, doing so will strip the threads. Tighten the pedal
shaft of Left Foot Pedal (20) using Spanner with Phillips Screwdriver provided. Insert pedal shaft of Right Foot
Pedal (21) into threaded hole in right crank (19). Turn the pedal shaft by hand in clockwise direction until tight.
Tighten the pedal shaft of Right Foot Pedal (21) using Spanner with Phillips Screwdriver provided.
3.
