86
Rev02132016
ThermalRite Blast Chiller Easy Touch Screen Manual
The relay 1 (output
N-U1
on the relay board) will be activated. Wait
5
seconds until the
power board sends a signal back to the display to prove that the relay is actually closed
(
U1
will become
Red
and
STATUS
will change to
ON
).
Meanwhile the watt load on that relay output will appear in the field
ENERGY
, to monitor
if there is any load by the component supplied by relay 1 and how much the wattage used
is. Press the
Return
icon to return to the
Service
menu or the Home icon to return to
the
Home
screen
NOTE:
When the relay is powering a contactor or power relay, the power consumption
will not show the actual power pulled by the electrical load connected to that contactor or
power relay.
Press again the
PLAY
button to activate relay 2, or
STOP
to de-activate the relay. Press
on the
Music
icon to test the buzzer
On
1650 W
