VANGUARD 16x8 / VANGUARD 8x4 / VANGUARD 4x2
69
Select:
Select the HDDs in the Select column to select the HDD(s).
Overwrite:
Select
Auto
to enable the overwrite function;
Off
to disable the overwrite
function. If
Auto
is selected, the DVR will overwrite the oldest files on the HDD when HDD is
full. The 1/3/7/14/30/90 Days stands for the overwrite starts day. For example, if 3 Days is
selected, the HDD will be overwritten after recording 3 days. If more data has to be recorded,
the oldest recorded data will be overwritten (FIFO, first-in first-out).
Format HDD:
The first time use HDDs have to be formatted before you can use it. Select the
desired HDDs and then click the
Format HDD
button to format the selected HDDs. Note that
only the HDDs with “Unformat” status displayed in the State column are required to format
or the recording function will not work. WARNING: This will effectively ERASE the ENTIRE
hard disk!! Please backup the data from HDDs before formatting the HDDs.
Record on eSATA:
Select
Enable
to start recording on eSATA for redundant recording. Note
that to perform this function, an external eSATA storage device must be connected to the
DVR in advance.
Note:
1.
Only the HDDs with “OK” in the State column can perform the recording function. If not,
format the HDDs before start using the recording function.
2.
The “Free Time” on the HDD list indicates the remaining time for the HDD to record
based on the pre-setup resolution, streaming and fps.
Click
Default
to return to factory default value,
Save
to save the settings, or
Cancel
to cancel
and leave the page.
