VANGUARD 16x8 / VANGUARD 8x4 / VANGUARD 4x2
143
5.4.8.3 Event Settings
You can configure the system event settings on this page.
Event Type:
Select an event type from the drop-down list.
Enable:
Switch to the right to enable the function.
Buzzer:
Set up the time for buzzer to sound when an event is triggered.
Show Message:
Switch to the right to enable the function. When the selected events have
been triggered, an event message will be displayed on the live screen.
Send Email:
Switch to the right to enable the function. When the selected events have been
triggered, the DVR will send an email alert to the receiver. Note that for this function to
work, you have to set up the Email function in advance (refer to
4.1.1.3.2 Email
).
Alarm Out:
Switch to the right to enable the alarm output.
Alarm Output:
Set up an alarm output time (duration) when an alarm is triggered.
Click
Save
to save the settings or
Refresh
to refresh the page.
