VANGUARD 16x8 / VANGUARD 8x4 / VANGUARD 4x2
53
Post Recording:
Select a post recording time when motion events occur.
Alarm Output:
Select an alarm output time (duration) when motion events occur. When a
motion object is detected, the alarm will last based on the alarm output time.
Alarm Out:
Check the box to enable the alarm output.
Show Message:
Check the box to enable the function. When an event occurs, an event
message will be displayed on the live screen.
Send Email:
Check the box to enable the function. When an event occurs, the DVR will send
an email alert to the receiver. Note that for this function to work, you have to set up the
Email function in advance (refer to
4.1.1.3.2 Email
).
Full Screen:
Check the box to enable the function. When an event occurs, the corresponding
channel with the event will be switched to full screen on the live screen.
Record Channel:
Check the box to enable the motion event recording function. When an
event occurs, the selected channel(s) will be recorded. Note that the IP Channels will only
appear when HVR hybrid mode is selected (Main Menu < System < General).
Copy:
You can apply the same configurations from one channel to the desired channels.
Select a channel from the
Copy
drop-down list first and then select a desired channel (or All)
from the
To
drop-down list, click the
Copy
button, the selected channel(s) will be applied
with the same configurations.
Click
Default
to return to factory default value,
Save
to save the settings, or
Cancel
to cancel
and leave the page.
