PowerVideo Plus
61
11.4 Set Pattern
You are given 90 seconds to move the camera (via the PTZ buttons) to different positions
(and different zoom / focus / Iris positions). The camera then saves that sequence under the
Pattern No. you’ve selected. Up to 4 Patterns can be configured. Click the Set Preset tab, the
following panel appears.
Figure 11-7
To set up a Pattern Sequence:
1.
Select a pan and tilt speed from the PTZ Speed drop-down list for the camera to move
to the directions when you use the direction buttons during the configuration period.
2.
Enter a pattern number in the Pattern No field.
3.
Click the Set button to start the 90-second configuration period. Use the direction /
zoom / focus / Iris buttons to move the camera in the desired sequence.
4.
Click the Complete button to end the configuration.
Click Clear can void the configuration for the entered Pattern No. Click Go to view/test the
configured Pattern sequence.
To activate the configured Pattern function on the Live View window, click the PTZ Controls
to display the PTZ Control panel. Click the Pattern button, click on the numeric buttons to
select a Pattern number and then click the Go button. The camera will move to the positions
in the Pattern sequence you have configured.
