EPN4220d/4220di
9
3.5.2
Important Note for Installation
Before installing, insert a micro SD card into the main body and replace the 3 desiccant bags inside
the top housing. The desiccant bag loses its effectiveness after you open the camera. To keep the
camera’s interior dry, it is highly recommended to replace the desiccant bags every time when you
open the camera.
3.5.2.1
Replacing the Desiccant Bags
1.
On the Top Housing, slightly press the black plastic socket backward and lift up the base
board.
2.
Remove the desiccant bags from the top housing.
3.
Stick the supplied 3 new desiccant bags inside the top housing.
Note:
Ensure
Not
to place the desiccant bags under the position of the fan.
4.
Insert the base board into the black plastic socket. The base board should click firmly into
position. Make sure the pin connector on the base board is lined up with the pin connector
on the main body when you press the two together.
