ENVR8304D-8CH / ENVR8304E-8CH
67
6.1.5
Pattern Tour
Figure 6-10
Pattern:
You are given 90 seconds to move the camera (via the PTZ buttons) to different
positions (and different zoom / focus / Iris positions). The camera then saves that sequence
under the Pattern No. you’ve selected. Up to 4 Patterns can be configured.
To set up a Pattern Sequence:
1.
Select a pan and tilt speed from the
Speed
drop-down list for the camera to move to the
directions when you use the direction buttons during the configuration period.
2.
Select a pattern number from the
Pattern No
drop-down list.
3.
Click the
Set
button to start the 90-second configuration period. Use the direction / zoom /
focus / Iris buttons to move the camera in the desired sequence.
4.
Click the
Complete
button again to end the configuration.
Click
Clear
can void the configuration for the entered Pattern No. Click
Go
to view/test the
configured Pattern sequence.
To activate the
Pattern
function on the PTZ Live View window, click the PTZ icon
on the
Menu Bar. Click the
Pattern
button, click on the numeric buttons to select a
Pattern
number
and then click the
Go
button. The camera will move to the positions in the Pattern sequence
you have configured. To stop the Pattern function, click the
Stop
button
on the PTZ
Control panel. Please refer to
4.1 PTZ
for detailed instructions.
