ENVR8304D-8CH / ENVR8304E-8CH
44
4.5
Sequence
The sequence function is used to display each channel in sequence mode. To enable this
function:
Click the Sequence button
to enter the sequential switching mode. The NVR will
display one channel at a time in full screen. The channels will be displayed in the sequence
and for the amount of time as configured in the System > Display Setting > M/T SEQ submenu.
The default setting is channels 1~8 with a dwell time of 3 seconds each – repeated. Please
refer to
6.5.2 M/T SEQ
for detailed information.
4.6
Zoom
You can zoom in the camera view up to 4X and navigate the camera view using the mouse.
Figure 4-6
