ENVR8304D-8CH / ENVR8304E-8CH
39
4.1
PTZ
You can use the PTZ Control Panel to control the connected PTZ cameras. To bring up the PTZ
control panel, on the OSD Root Menu, click the PTZ button
.
The following actions can be performed using the PTZ Control
Panel:
1.
To move the camera to the desired direction and angle,
click the
Direction
buttons.
2.
To zoom in / out the camera view, click the
Zoom
buttons.
3.
To adjust the camera focus, click the Focus buttons.
4.
To adjust the Iris open to increase / decrease the amount of
light in, click the
Iris
buttons.
5.
To program a Preset Position (if supported by the camera):
a.
Move the PTZ camera to the desired position.
b.
Click the
Preset
button.
c.
Set up a preset number for the current position by
clicking the number buttons. The number will be
displayed in the number box.
d.
Click the
Set
button
to save the settings.
6.
To jump to a Preset Position:
a.
Click the
Preset
button.
b.
Click the desired Preset number.
c.
Click the
Go
button.
7.
Shortcut for Preset 1 ~ 9:
a.
Click digit 1 ~ 9 button without clicking any other
buttons.
b.
The camera will seek that Preset Position.
8.
To delete a Preset Position (if supported by the camera):
a.
Click the
Preset
button.
b.
Click the desired Preset number.
c.
Click the
Delete
button.
Figure 4-2
