57
c) In the DOS Prompt, type “ping pool.ntp.org” to find out the IP address of an NTP Server.
If selecting “GPS”, you will be able to do the following setting:
Update Interval: The frequency that the system automatically updates the time via the NTP server. Select
Daily, Weekly, or Monthly.
Click
button to return to the previous level of menu.
4.5.2 Daylight
Saving
Click
button to set up daylight saving parameters
Figure 4-25 Date/Time Settings-Daylight Saving
Daylight Saving: Check the box to enable automatic daylight saving time adjustment.
Start Date: Set the start date for daylight saving time.
Start Time (hh:mm): Set the time when daylight saving time begins.
Set To (hh:mm): This is what the time will change to when daylight saving begins. For most regions, this
will be one hour ahead of the “Start Time”.
End Date: Set the end date for daylight saving time.
End Time (hh:mm): Set the time when daylight saving time ends.
The time change difference on the End Date will be the same as the difference between the Start Time and
End Time entered for the Start Date (typically 1 hour as in the example shown).
Click
button to return to the previous level of menu.
Summary of Contents for EMV400
