manualshive.com logo in svg

EverFocus EMV400, User Manual, Page: 90 / 129

Share
Download
EverFocus EMV400 User Manual Download Page 90

 

 

82

4.9

 

INFORMATION 

Figure 4.50 is a screenshot of the INFORMATION MENU. This menu displays important (read only) system 
information. 

 

Figure 4-50 Information

 

System 
Version: Displays firmware version number. 
Model: Displays DVR model number. 
NTSC/PAL: Displays current video format selected based video format on Camera 1 input at boot up. 
 
Status 
Disk: Displays status of the installed disk(s); normal disk operation is indicated by “OK”. 
Fans: Displays fan status; normal fan operation is indicated by “OK”. 
 
Network (Select network type from LAN, Wireless and Mobile) 
IP Address: Displays the DVR’s current IP Address as set in the Network or Express Setup screen. 
MAC: Unique address of the DVR’s internal network card. This option cannot be changed. 
DVR Name: Displays DVR DDNS name if configured.  
Network ID: The ID number for the alarm network as set in the Alarm Server screen. 

 
Click 

 button to return to the previous level of menu. 

 

Summary of Contents for EMV400


































































































































Reviews:

No comments