ECOR FHD 4F / 8F / 16F Full HD DVR
8
No. Name
Description
1
Video Input
Connect up to 4 / 8 / 16 analog HD or SD cameras to any
channels using the coaxial cables.
(The eZ.HD series DVR
doesn’t support HD-TVI / HD-CVI / HD-SDI cameras.)
Note:
The DVR can automatically configure itself as NTSC or
PAL. To do this, connect a camera to any channel of the DVR.
The DVR will detect the first connected camera format (NTSC
or PAL) and then automatically configure itself to the
detected format from the first connected camera. For
example, if the format of the first connected camera is NTSC,
the DVR will configure itself to NTSC format.
2
Call Monitor Port (BNC)
Connects to the Call monitor using a BNC cable.
3
Audio Input 1~4 (RCA)
Connects to the audio input devices such as microphones.
Note that the microphone with a (built-in) amplifier and
external power supply is required.
4
Alarm Input / Output
Connects to 4 alarm inputs, and to 1 alarm output device.
You can also connect to the radio-controlled clock for time
synchronization. Please refer to
2.2.2 Alarm I/O
.
5
Power Switch
Press to turn on or off the power.
6
Main Monitor Port (HDMI)
Connects to the Main monitor using a HDMI cable.
7
Audio Output RCA
Connects to the audio output devices, such as speakers.
Note that the speaker with a (built-in) amplifier and external
power is required.
8
Main Monitor Port (VGA)
Connects to the Main monitor using a VGA cable.
9
LAN
Connects to the Network.
10 USB Interface
The USB2.0 port for connecting to a mouse, external storage
device or EKB200 keyboard.
11 RS-485 Port
Connects to the RS-485 device, such as EverFocus’ EKB-500
keyboard.
12 Power Port
Connects to the DC 12V power using the supplied Power
Cord.
