EverFocus ECOR 4 Page 92 Instruction Manual Download

Page: 92 / 105

EVERFOCUS DDNS SETUP

Setup Steps:

Step 1. Set up the Network Menu according to the instructions detailed in the Networking chapter.

(Make sure that DNS Server 1 is set correctly or DDNS will not work)

Step 2. Go to the website

http://everfocusddns.com

and check for an available name.

Note:

This step is optional, as it is only used to check the availability of host name. If

the name is available, proceed to step 3 for DDNS setup.

Step 3. In DVR’s Network Menu, go to DDNS. Choose “EverfocusDDNS” for the Server and put in

your chosen name for DVR Name.

Step 4. Press “

Submit/Update

” button to confirm.

Step 5. You should now be able to connect by typing the host name you created in browser.

Example:

http://hostname.everfocusddns.com

Chapter

Summary of Contents for ECOR 4










































































































Search results

Summary of Contents for ECOR 4

Reviews:

Related manuals for ECOR 4

Brands by name

Popular brands

EverFocus ECOR 4, Instruction Manual

Search results

Summary of Contents for ECOR 4

Reviews:

Related manuals for ECOR 4

Brands by name

Popular brands