EverFocus ECOR 4 Page 40 Instruction Manual Download

Page: 40 / 105

Record Audio:

Check the box to record audio.

Resolution:

Select recording resolution based on video format.

NTSC: 704x480 / 704x240 / 352x240

PAL: 704x576 / 704x288 / 352x288

Time Stamp:

Select if the time and date will display while recording. Choose from Top, Bottom, or Off.

Record Overwrite:

Check the box and disk will begin overwriting when full.

Auto Erase Video:

The hard drive will automatically erase after the selected number of days. Select “Off”

to disable this function.

Pre-alarm Recording:

Check the box to enable pre-alarm recording function.

5.2.2

Play

Figure 5.2 (Record & Play Menu - Play)

Quick Playback:

Check the box to enable quick playback function.

Playback From X Seconds ago:

When the DVR is put into playback, it will begin playing automatically

from the selected time. Choose from 60 to 3600 seconds (1 – 60 minutes).

Summary of Contents for ECOR 4










































































































Search results

Summary of Contents for ECOR 4

Reviews:

Related manuals for ECOR 4

Brands by name

Popular brands

EverFocus ECOR 4, Instruction Manual

Search results

Summary of Contents for ECOR 4

Reviews:

Related manuals for ECOR 4

Brands by name

Popular brands