EverFocus ECOR 4 Page 28 Instruction Manual Download

Page: 28 / 105

4.3

PLAYBACK OPERATION

4.3.1

Playback

Mouse: Right-click while viewing cameras to bring up menu bar and click

to start playback.

Front panel: Press

button while viewing cameras to directly start playback.

4.3.2

Reverse playback

Mouse: Right-click while viewing cameras to bring up menu bar and click

to start rewind.

Front panel: Press

button while viewing cameras to directly start rewind.

4.3.3

Pause

Mouse: While in playback mode, right-click to bring up menu bar and click either

to pause

the video.

Front panel: While in playback mode, press either

keys to pause the video.

4.3.4

Fast forward

Mouse: While in playback mode, right-click to bring up menu bar and click

to start fast forward. Click

the button again to increase playback speed to higher level (2x, 4x, 8x, 16x, 32x, or max).

Front panel: While in playback mode, press

key to start fast forward. Press the key

again to increase

speed to higher level (2x, 4x, 8x, 16x, 32x, or max).

Summary of Contents for ECOR 4










































































































Search results

Summary of Contents for ECOR 4

Reviews:

Related manuals for ECOR 4

Brands by name

Popular brands

EverFocus ECOR 4, Instruction Manual

Search results

Summary of Contents for ECOR 4

Reviews:

Related manuals for ECOR 4

Brands by name

Popular brands