42
5.5
ALARM & EVENT SETTING
Figure 5.12
is a screen shot of the
ALARM & EVENT SETTING MENU
. This menu will walk you through
alarm and event setup.
Figure 5.12 (Alarm & Event Menu - Alarm)
5.5.1
Alarm
Alarm:
Select the alarm number.
Enable:
Check box to enable alarm.
Log:
Check box to record alarm events in the log.
Input Type:
This field is to change the type of alarm trigger.
N.O.: Normal Open contact.
N.C.: Normal Close contact.
Name:
Assign a name for the alarm input.
Active Camera:
This field is for assigning the alarm to a specific camera. For example if you had an
external motion detector on camera one you would set this option to “1”.
PTZ Preset:
Select PTZ Preset from “0” to “255”. If the Active Camera is a PTZ speed dome, the alarm will
move the camera to a preset position for event recording. This function can improve surveillance quality of
an alarm event.
Alarm Output:
This will transmit a signal to another device. It can be set to either “
NONE
”
(not activated)
or “
1
” (output signal 1 transmits).
Summary of Contents for ECOR 4
Page 1: ...Instruction Manual E EC CO OR R S Se er ri ie es s D DV VR R ...
Page 84: ...77 ...
Page 85: ...78 ...
