Value IP 288 / 368 / 468 Series
9
b.
Through the wall / ceiling: run the cables through the hole on the wall / ceiling.
Wall or
Ceiling
5.
Use the supplied four Screws to screw the camera base to the ceiling / wall.
6.
Adjust the camera angle and twist back the Outer Housing simultaneously.
7.
Optionally screw back the Set Screw by using the supplied Hexagon Wrench to prevent
uninstallation.
8.
Connect the LAN / PoE cable to the camera.
a.
Remove the Screw Cap from the Cable Gland.
