EverFocus EBN288/368 User Manual Download Page 86

Page: 86 / 88

Value IP 2MP 288 Series / 3MP 368 Series

On the Network Setting page (Setting > System Settings > Network > IP Settings), configure the IP

Settings, keep the default Port Settings and then click the

Save

button.



Static IP

is selected: Enter the IP address, subnet mask, default gateway and the DNS Server.

Please consult with your ISP service provider for the information of subnet mask, default gateway
and the DNS Server.



DHCP

is selected: The IP address, subnet mask, default gateway and the DNS Server will be

assigned automatically by DHCP server.



Enable PPPoE

is selected: Enter the User Name (e.g. [email protected]) and Password provided by

your ISP service provider.

In the DDNS Settings field (Setting > System Settings > Network > DDNS Settings), register a free host

name from EverFocus DDNS and then click the

Save

button.

Check

Enable DDNS

to enable the DDNS function.

Summary of Contents for EBN288/368

























































































Search results

Summary of Contents for EBN288/368

Reviews:

Related manuals for EBN288/368

Brands by name

Popular brands

EverFocus EBN288/368, User Manual

Search results

Summary of Contents for EBN288/368

Reviews:

Related manuals for EBN288/368

Brands by name

Popular brands