EverFocus EBN288/368 User Manual Download Page 53

Page: 53 / 88

Value IP 2MP 288 Series / 3MP 368 Series

7.1.9.

Local Settings

You can configure the storage path for storing the recordings / snapshot on your PC.

View Size:

Select the appropriate view size of the live view window.

Live View Snapshot:

Type the storage path for snapshots captured in the Home page (Live View

window).

Playback Snapshot:

Type the storage path for snapshots captured in the Playback page.

File Snapshot:

Type the storage path for snapshots captured in the File page.

Backup file:

Type the storage path for recording files backed up in the Playback page.

Live View Recording:

Type the storage path for recordings recorded in the Home page (Live View

window).

Record Format:

Currently only AVI is available.

Live View Mode:

Slide the bar to set up the live stream performance between Real Time and

Smooth way.

After complete the settings, click

Save

to apply the changes.

Note:

The Playback related settings are only functional if the micro SD Card has been inserted

in the camera’s micro SD card slot.

Summary of Contents for EBN288/368

























































































Search results

Summary of Contents for EBN288/368

Reviews:

Related manuals for EBN288/368

Brands by name

Popular brands

EverFocus EBN288/368, User Manual

Search results

Summary of Contents for EBN288/368

Reviews:

Related manuals for EBN288/368

Brands by name

Popular brands