7
7
7
7
Fig. 3.
Installation Overall Steps
1.
One reader, basic access control
The most basic configuration involves one card reader and an electric strike. In
this configuration, a person presents a card to the reader, and is either granted or
denied access. The electric strike unlocks if the system grants access. Another
variation of this scenario involves setting the system up to monitor whether the
door is open, which allows the system to protect against propped open doors, or
doors being held open for too long.
2.
One reader, with request to exit device
Step 1: Preparing for the Installation
•
Obtain a floor plan
•
Determine the hardware and location
•
Determine the number of controller and
modules and system architecture
Step 2: Hardware Installation
•
Mount the controller and enclosure
•
Install and connect the card readers
•
Connect the electric strikes or mag locks
•
Connect the controller to the system
computer and desktop reader
•
Mount a backup battery in the enclosure
Step 3: Software Setup/Configuration
•
Install the software in the control computer
•
Setup the user accounts who will use the software
•
Configure the controller and all other hardware settings
•
Configure the holidays, access group and the door control
schedule
•
Enroll the cards and set the cardholders’ properties
Summary of Contents for EBC890
Page 62: ...54 54 54 54 Notes...
Page 63: ......
