52
52
52
52
Keypad Settings define whether the reader is a keypad reader.
The System Reader can be used to acquire the card’s serial number easily and
conveniently.
4.
Configure the alarm settings
All of the alarm inputs can be assigned to the different alarm outputs. Also users can
set the events that can trigger alarm outputs.
Configure the Holidays, Access Group and Door Control
Schedule
At this step, users will configure the holidays, access groups and the door control schedule.
1.
Configure the holidays
Users can add or delete holidays in the software. Beside holidays, two additional types
of dates are supplied in the system. Different access rules can be applied to different
dates.
2.
Configure the access groups
An access group defines a group of cardholders who share the same access rules at the
associated access points and at specified times. Set the access rules for the access group
here. And assign the cardholder to a certain access group in the next step.
3.
Configure the door control schedule
On the Flex series controller, the door can be configured as normally open, with card,
with PIN and card, which means, respectively, the door will be remain open, a valid
card has to be presented, and both a valid card and a PIN have to be presented to
require the access.
Please refer to the software manual for the details.
Enroll Card Holders
This will explain the steps to enroll card holders in the system. There are two ways to enroll a
card holder:
1.
Enter the card number manually.
2.
Present a card at the desktop reader and the card number will be added into the system
automatically.
The properties for each card should be input at this time. The primary properties are card
holder name, PIN, forced PIN, and access group. Users can configure the cardholders
individually or can do batch configurations if a group of cardholders share common properties.
Summary of Contents for EBC890
Page 62: ...54 54 54 54 Notes...
Page 63: ......
