EverFocus EBC890, User Manual

Page: 38 / 64

30
30 30
30
Enter a new system PIN. Enter it a second time to confirm. Press to set the new system
PIN. Pressing at any time will exit the menu without changing the system PIN.
If the system PIN is updated successfully, LCD shows:
Set Arm Password
Arm PIN must be entered before the controller can be armed or disarmed via controller
keypad. The factory default arm PIN is 000000.
Under System Setting menu, press at the window below to set arm PIN.
The LCD will display the following menu.
Enter a new arm PIN. Enter it a second time to confirm. Press to set the new arm PIN.
Set Wiegand Output Format
Press to change the wiegand output format when the below screen is shown:
Press to switch between wiegand 26 bits and 34 bits press at any time will exit the
menu
Set Language
Under the System Setting Menu, press to at the below screen to enter language Setting.
Wiegand 34 bits
Wiegand 34 bits Wiegand 34 bits
Wiegand 34 bits
[ENT] to toggle [ENT] to toggle [ENT] to toggle [ENT] to toggle
Wiegand 26 bits
Wiegand 26 bits Wiegand 26 bits
Wiegand 26 bits
[ENT] to toggle [ENT] to toggle [ENT] to toggle [ENT] to toggle
Set Wiegand Output Set Wiegand Output Set Wiegand Output Set Wiegand Output
Format
Format Format Format
Input ARM Password: Input ARM Password: Input ARM Password: Input ARM Password:
______ ______ ______ ______
Set ARM Password Set ARM Password Set ARM Password Set ARM Password
Setting updated Setting updated Setting updated Setting updated
successfully
successfully successfully
successfully
Repeat: Repeat: Repeat: Repeat:
______
______ ______
______
Input SYS PIN:
Input SYS PIN: Input SYS PIN:
Input SYS PIN:
______ ______ ______ ______