EverFocus EBC890, User Manual

Page: 37 / 64

29
29 29
29
Set Time
Under the System Setting Menu, press at to set the time.
The LCD will display the following menu. Use the numerical keys to enter the current time as a
six-digit number (HH
：
MM
：
SS). The time must be in the range 00:00:00--23:59:59. After
entering the time, press to confirm.
Auto Daylight Savings Time
Under the System Setting Menu, press
to adjust the settings for Auto Daylight Savings :
Press to toggle the setting between On/Off, Press to exit
When auto daylight savings is turned on, the controller will automatically adjust the time based
on the setting. In the example above, it will adjust the time 1 hour forward on the first Sunday
in April, and adjust 1 hour back on the first Sunday in October. The start/end time and the
time period adjustment can be set by Flex software.
Set System Password
A system password must be entered before the user can configure the controller via the keypad.
The factory default system password is 000000. It is recommended that the password is
changed after the initial log-in for maximum security. Be sure to keep the new password; if lost
the system can only be accessed after purging all stored data using the reset button at back
panel.
Under the System Setting Menu, press to set system password.
The LCD will display the following menu.
Set SYS Password
Set SYS Password Set SYS Password
Set SYS Password
Auto d
Auto d Auto d
Auto daylight saving
aylight saving aylight saving
aylight saving
OFF [ENT] to toggle
OFF [ENT] to toggle OFF [ENT] to toggle
OFF [ENT] to toggle
Auto daylight saving
Auto daylight saving Auto daylight saving
Auto daylight saving
ON [ENT] to toggle
ON [ENT] to toggle ON [ENT] to toggle
ON [ENT] to toggle
Auto Daylight Saving
Auto Daylight Saving Auto Daylight Saving
Auto Daylight Saving
Set Time (HH:MM:SS) Set Time (HH:MM:SS) Set Time (HH:MM:SS) Set Time (HH:MM:SS)
__:__:__ __:__:__ __:__:__ __:__:__
Set Time Set Time Set Time Set Time