background image

19

Care and Maintenance

* R404A freezer models are equipped with a condenser coil air filter. R290 refrigerator models are not equipped with a condenser 
coil air filter. If your product is an R290 refrigerator model, you may skip this section.

This section applies to all Everest products. The condenser coil requires monthly cleaning to keep 
the metal fins clear of lint, dust and grease build-up. A clogged condenser coil severely reduces your 
product’s energy efficiency and places strain on the compressor and other components leading to 
advanced failure. Cleaning the condenser coil is the product owner’s personal responsibility. 

Warranty is void if the following guidelines are not met.

 

Condenser Coil Cleaning Instructions

1. 

 Disconnect the unit from the outlet before 
performing maintenance.

2. 

 Locate the condenser coil at the bottom 
section of the unit. Some frames do not  
have panels for ease of access and  
ventilation purposes.

3. 

 Use a long bristled brush in a vertical 
sweeping motion to remove lint, dust and 
debris from in between the metal fins of the 
condenser coil. Do not apply heavy pressure 
so as not to bend the fins.

Summary of Contents for EDA1






























Reviews: