EVEREADY B1-5.1-48, User Manual

Page: 5 / 24

3
www.solarsg.com.au
USER MANUAL
Notice
• Please ensure that the circuit breaker is off when wiring B1 battery.
• B1 battery can only be used together with Eveready AS1 and HS1 series
energy storage products, otherwise it cannot be used normally.
1.2 Explanation of Symbols
Hazardous voltage
Since the system is connected to the power grid, all relevant
operations on the battery must be performed by qualified personnel.
No open flames
Install the battery away from inflammable and explosive articles
or gases.
Danger of hot surface
During operation, internal components of the equipment will release
heat. Do not touch the metal casing of the inverter during operation.
Attention
Install the battery out of the reach of children.
An error occurred
Please refer to this manual for troubleshooting.
This device cannot be treated as household waste
For the correct treatment method, please refer to Chapter 6
"Battery Maintenance".
CE mark
The equipment complies with low voltage and EMC instructions.
Recyclable
Symbol Description