background image

 

2                       For Professional Technical Support call 1-844-241-5521 

 

 

Table of Contents .......................................................................2 
Performance ...............................................................................2 
Warranty .....................................................................................2 
Safety Information ......................................................................3 
Pre-Installation ..........................................................................5 

Installation ................................................................................. 6 
Operation& Storage .................................................................. 10 
Maintenance............................................................................. 11 
Troubleshooting ....................................................................... 13

 

 

 

 

 

Model 

HP 

GPH of Water @ Total Feet Of Lift 

Max. Lift 

0 ft 

10 ft. 

20 ft. 

30 ft. 

40 ft. 

50 ft. 

SPP15002 

1 1/2 

5300 

5000 

3920 

3720 

2700 

1800 

66 

The manufacturer warrants the products to be free from defects in materials and workmanship for a period of one year from date of purchase. This 
warranty applies only to the original consumer purchaser and only to products used in normal use and service. If within one year this product is found 
upon examination by the manufacturer to be defective in materials or workmanship, the manufacturer’s only obligation, and your exclusive remedy, 
is the repair or replacement of the product at the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, 
accident, modifications, alterations, neglect or mishandling. Your original receipt of purchase is required to determine warranty eligibility. 

The purchaser must pay all labor and shipping charges necessary to replace the product covered by this warranty. 

This Limited Warranty does not cover products which have been damaged as a result of an accident, misuse, abuse, negligence, alteration, improper 
installation or maintenance, or failure to operate in accordance with the instructions supplied with the products, or operational failures caused by 
corrosion, rust, or other foreign materials in the system. 

Requests for service under this warranty shall be made by returning the defective product to the manufacturer as soon as possible after the discovery 
of any alleged defect. The manufacturer will subsequently take corrective action as promptly as reasonably possible.  

The manufacturer does not warrant and especially disclaims any warranty, whether express or implied, of fitness for a particular purpose, other than 
the warranty contained herein. This is the exclusive remedy and any liability for any and all indirect or consequential damages or expenses 
whatsoever is excluded. 

Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so 
the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary 
from state to state. 

For Professional Technical Support call 1-844-241-5521 or visit HOMEDEPOT.COM. 

 

 

 

 

 

 

Summary of Contents for SPP15002

















Reviews: