EVER UPS SINLINE RT / RT XL series instruction manual
59
www.ever.eu
Pomoc Techniczna, tel.: +48 61 6500 400
2017-04-26 12:41
b) the black conductors connecting the batteries 5 - 8 in series, namely
connections from the negative (-) terminal of battery no. 5 and the positive (+)
terminal of the next battery, up to the positive (+) terminal of battery no. 8,
c) the black conductor from the negative (-) terminal of battery no. 8.
Fig. 44: Layout and connection of the batteries
7.
Make sure the dimensions and type of replacement batteries satisfy the
technical parameters (are identical as the parameters of the old batteries).
8.
Install the new battery in reverse order to the steps for uninstalling the battery.
9.
Install the battery compartment cover.
10.
Connect the conductors to the UPS unit's front panel.
11.
Install the UPS unit's front panel.
REPLACING THE BATTERIES IN THE BATTERY MODULE
To replace the battery inside the battery module follow these steps:
1.
Switch off the UPS unit.
2.
Disconnect the UPS unit's power cord from the mains (it is
NOT ALLOWED
to
replace the battery when the UPS is connected to the mains).
3.
Disassemble the UPS unit's and the battery module's front panel.
4.
Disconnect the conductors from the front panel (Fig. 21).
5.
Disconnect the battery module's terminal from the UPS battery terminal.
CAUTION!
Battery replacement can be conducted only when the UPS is
in horizontal position (Rack version). Performing the operation in any
other position may cause damage to the device.
Summary of Contents for SINLINE RT
Page 1: ......